> For the complete documentation index, see [llms.txt](https://book.bsdcn.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://book.bsdcn.org/rpicn/shu-mei-pai/ruan-jian-lai-yuan.md).

# 软件来源

在树莓派，我们尽可能多地将代码开源，以便于你按自己的用途使用和改造。树莓派专门为我们的产品开发和支持软件，并将精力集中在能提供最佳用户体验的软件上。例如，优化多媒体加速的驱动，如 3D、HEVC 解码、摄像头成像流水线、AI 加速、双 HDMI 和音频。

## 在树莓派系统中查找软件源代码

在查找随树莓派系统分发的软件时，通常存在上游软件源，我们对其打补丁以创建下游软件包（带有 `+rpt` 标签的软件包）。要查看这些软件包的源代码，通过 apt 获取通常更方便。为此，你首先需要编辑 apt 列表以包含源代码包。编辑以下文件，将每个“Types: deb”行改为“Types: deb deb-src”：

* `/etc/apt/sources.list.d/debian.sources`（在 64 位镜像上） 或
* `/etc/apt/sources.list.d/raspbian.sources`（在 32 位镜像上） 以及
* `/etc/apt/sources.list.d/raspi.sources`

接下来必须更新软件包列表：

```sh
$ sudo apt update
```

现在你可以获取软件包源代码，例如：

```sh
$ apt source labwc
```

接下来，你需要安装一个辅助软件包：

```sh
$ sudo apt install devscripts
```

最后，你可以使用标准的 Debian 构建流程构建软件包：

```sh
$ sudo apt build-dep labwc
$ cd labwc-0.8.4
$ debuild -uc -us
```

## 我们的 GitHub 组织

你还可以在 GitHub 仓库中以更标准的形式找到我们的软件；我们使用三个 GitHub 组织发布源代码：

* <https://github.com/raspberrypi>
* <https://github.com/raspberrypi-ui>
* <https://github.com/RPi-Distro>

我们还在以下组织发布与我们的图书和杂志相关的内容：

* <https://github.com/raspberrypipress>
* <https://github.com/themagpimag>

## 分类源代码列表

以下是大多数人感兴趣的精选仓库列表：

### 主要源代码

[**raspberrypi/linux**](https://github.com/raspberrypi/linux)：此仓库包含下游 Linux 内核的源代码，支持并运行于树莓派 1 到 5 的所有版本。

[**raspberrypi/firmware**](https://github.com/raspberrypi/firmware)：此仓库包含闭源固件，不过以下两个链接很有用：

* [固件的变更日志](https://github.com/raspberrypi/firmware/commits/master/)
* [设备树叠加层 README](https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README)

[**raspberrypi/rpi-eeprom**](https://github.com/raspberrypi/rpi-eeprom)：树莓派 4 和树莓派 5 引导加载程序 EEPROM 的安装脚本和二进制文件，包括[发布版本](https://github.com/raspberrypi/rpi-eeprom/releases)和[发行说明](https://github.com/raspberrypi/rpi-eeprom/blob/master/releases.md)。

### 库和应用程序

[**raspberrypi/utils**](https://github.com/raspberrypi/utils)：实用工具集合，如 pinctrl、piolib 和 raspinfo，以及 gpiolib——树莓派支持的直接访问 GPIO 引脚的方法。

[**raspberrypi/libcamera**](https://github.com/raspberrypi/libcamera)：用于控制树莓派设备 ISP 和摄像头的 libcamera 库实现。

[**raspberrypi/rpicam-apps**](https://github.com/raspberrypi/rpicam-apps)：使用 libcamera 通过树莓派摄像头进行图像/视频处理和编码的 C++ 库与应用程序套件。

[**raspberrypi/picamera2**](https://github.com/raspberrypi/picamera2)：用于使用和控制树莓派摄像头的 Python 库。

[**raspberrypi/drmu**](https://github.com/raspberrypi/drmu)：用于直接控制和访问多媒体接口的库。

### 桌面

[**raspberrypi-ui/rpd-metas**](https://github.com/raspberrypi-ui/rpd-metas)：用于创建桌面的元软件包。

[**raspberrypi-ui/wf-panel-pi**](https://github.com/raspberrypi-ui/wf-panel-pi)：运行基于 Wayland 的桌面时显示在屏幕上的任务栏或程序坞。

[**raspberrypi-ui/lxpanel-pi**](https://github.com/raspberrypi-ui/lxpanel-pi)：运行旧版基于 X 的桌面时显示在屏幕上方的任务栏。

以下组件显示在任务栏上：

* [pplug-batt](https://github.com/raspberrypi-ui/pplug-batt)
* [pplug-bluetooth](https://github.com/raspberrypi-ui/pplug-bluetooth)
* [pplug-clock](https://github.com/raspberrypi-ui/pplug-clock)
* [pplug-cpu](https://github.com/raspberrypi-ui/pplug-cpu)
* [pplug-cputemp](https://github.com/raspberrypi-ui/pplug-cputemp)
* [pplug-ejecter](https://github.com/raspberrypi-ui/pplug-ejecter)
* [pplug-gpu](https://github.com/raspberrypi-ui/pplug-gpu)
* [pplug-menu](https://github.com/raspberrypi-ui/pplug-menu)
* [pplug-netman](https://github.com/raspberrypi-ui/pplug-netman)
* [pplug-power](https://github.com/raspberrypi-ui/pplug-power)
* [pplug-updater](https://github.com/raspberrypi-ui/pplug-updater)
* [pplug-volumepulse](https://github.com/raspberrypi-ui/pplug-volumepulse)

[**raspberrypi-ui/pcmanfm**](https://github.com/raspberrypi-ui/pcmanfm) 和 [**raspberrypi-ui/libfm**](https://github.com/raspberrypi-ui/libfm)：桌面使用的文件管理器，它还负责显示桌面背景。

[**raspberrypi-ui/rpcc**](https://github.com/raspberrypi-ui/rpcc)：控制中心应用程序。

[**raspberrypi-ui/rc\_gui**](https://github.com/raspberrypi-ui/rc_gui)：控制中心的树莓派配置插件。

[**raspberrypi-ui/appset**](https://github.com/raspberrypi-ui/appset)：控制中心的外观设置插件。

[**raspberrypi-ui/rasputin**](https://github.com/raspberrypi-ui/rasputin)：控制中心的鼠标和键盘设置插件。

[**raspberrypi-ui/raindrop**](https://github.com/raspberrypi-ui/raindrop)：控制中心的屏幕配置插件。

[**raspberrypi-ui/rpinters**](https://github.com/raspberrypi-ui/rpinters)：控制中心的打印机设置插件。

### 应用程序

[**raspberrypi-ui/agnostics**](https://github.com/raspberrypi-ui/agnostics)：用于检查 SD 卡的诊断应用程序。

[**raspberrypi-ui/bookshelf**](https://github.com/raspberrypi-ui/bookshelf)：Bookshelf 应用程序的代码，可让你下载和阅读电子书以及《树莓派官方杂志》的往期期刊。

[**raspberrypi-ui/piclone**](https://github.com/raspberrypi-ui/piclone)：SD 卡复制器应用程序，可克隆卡和驱动器。

[**raspberrypi-ui/rp-prefapps**](https://github.com/raspberrypi-ui/rp-prefapps)：推荐软件应用程序，可安装或移除选定的程序。

### 调试

[**raspberrypi/rpi-analyse-boot**](https://github.com/raspberrypi/rpi-analyse-boot)：启动分析服务，从各种不同来源收集启动耗时指标。

### 工具

[**raspberrypi/rpi-imager**](https://github.com/raspberrypi/rpi-imager)：树莓派启动盘制作工具应用程序的代码，用于将操作系统刷写到 SD 卡。

[**raspberrypi/rpi-image-gen**](https://github.com/raspberrypi/rpi-image-gen)：用于为嵌入式树莓派系统开发操作系统的构建系统。

[**raspberrypi/usbboot**](https://github.com/raspberrypi/usbboot)：通过 USB 启动树莓派以配置计算模块和树莓派设备的工具。

[**raspberrypi/rpi-sb-provisioner**](https://github.com/raspberrypi/rpi-sb-provisioner)：大规模配置树莓派设备的工具，包括安全启动和加密文件系统。（支持树莓派 5、计算模块 4 和计算模块 5。）

### 反馈

[**raspberrypi/trixie-feedback**](https://github.com/raspberrypi/trixie-feedback)：专门预留用于报告当前树莓派系统版本问题的仓库。

### 树莓派 Pico

[**Microsoft Visual Studio Code 的树莓派 Pico 扩展**](https://marketplace.visualstudio.com/items?itemName=raspberry-pi.raspberry-pi-pico)：可在此下载并安装树莓派 Pico SDK 的 VS Code 扩展。

[**raspberrypi/pico-setup**](https://github.com/raspberrypi/pico-setup)：用于命令行使用的树莓派 Pico SDK 快速安装工具。

[**raspberrypi/pico-sdk**](https://github.com/raspberrypi/pico-sdk)：树莓派 Pico SDK 源代码。

[**raspberrypi/debugprobe**](https://github.com/raspberrypi/debugprobe)：树莓派调试套件的源代码，可轻松提供 SWD 和 UART。

[**raspberrypi/openocd**](https://github.com/raspberrypi/openocd)：树莓派下游 OpenOCD 源代码。

[**raspberrypi/pico-examples**](https://github.com/raspberrypi/pico-examples)：树莓派 Pico 示例。

[**raspberrypi/picotool**](https://github.com/raspberrypi/picotool)：用于在 BOOTSEL 模式下与 RP 系列设备交互的工具。


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://book.bsdcn.org/rpicn/shu-mei-pai/ruan-jian-lai-yuan.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
