> For the complete documentation index, see [llms.txt](https://book.bsdcn.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://book.bsdcn.org/rpicn/shu-mei-pai/ling-dian-xing-hao.md).

# Zero 型号

树莓派 **Zero** 提供超紧凑的单板计算机（SBC）设计，功耗低于我们的[经典型单板计算机](https://book.bsdcn.org/rpicn/shu-mei-pai/jing-dian-dan-ban-ji-suan-ji.md)。这些型号省略了经典型树莓派 SBC 上的某些功能，以实现更小的外形尺寸，更适合嵌入式和便携式应用。所有 Zero 型号共享相同的硬件基线，包括：

* 一个 microSD 卡插槽。
* 一个 mini HDMI 端口。
* 两个 micro-USB 端口，一个用于输入电源，一个用于外部设备。

自初代 Zero 的 1.3 版起，所有 Zero 型号还包含一个 mini 22 针、0.5 mm（细）间距、11.5 mm 宽的 CSI（摄像头）端口。

同一代树莓派 Zero 内各型号的主要区别取决于主板是否包含：

* **无线连接。** 带有 *W* 后缀的型号包含用于 Wi-Fi 和蓝牙的板载无线电模块；不带 W 后缀的型号没有无线功能，需要 USB 适配器才能联网。
* **预焊 GPIO 排针。** 带有 *H* 后缀或 *with headers* 标签（视代数而定）的型号配有预焊的 40 针排针。不带后缀或标签的型号只有未焊接的孔；如果你想使用 GPIO，需要手动焊接排针或安装兼容的第三方引脚套件。

## 型号列表

下表按时间倒序列出树莓派 Zero 型号，便于快速查阅其主要区别特征。

带有无线连接的树莓派 Zero 型号（以 *W* 后缀标示）具备：

* 2.4 GHz 单频 802.11n Wi-Fi（35 Mb/s）。
* 蓝牙 4.2 和低功耗蓝牙（BLE）。

树莓派 **Zero 2 W** 使用 *with headers* 而非 *H* 后缀来表示带排针版本。缺少 *H* 或 *with headers* 后缀的型号，其 GPIO 排针未焊接引脚。有关各型号的更多信息，请参见本页后面的专门章节。

| 型号                                       | 微处理器                                                                              | 内存（RAM）   | GPIO 排针             | GPU          | CPU                      |
| ---------------------------------------- | --------------------------------------------------------------------------------- | --------- | ------------------- | ------------ | ------------------------ |
| Raspberry Pi Zero 2 W with headers（2021） | 树莓派 [RP3A0](https://book.bsdcn.org/rpicn/shu-mei-pai/chu-li-qi.md#rp3a0)          | 512 MB 内存 | 40 针 GPIO 排针        | VideoCore IV | 1 GHz 四核 64 位 Cortex-A53 |
| Raspberry Pi Zero 2 W（2021）              | 树莓派 [RP3A0](https://book.bsdcn.org/rpicn/shu-mei-pai/chu-li-qi.md#rp3a0)          | 512 MB 内存 | 未焊接引脚的 40 针 GPIO 排针 | VideoCore IV | 1 GHz 四核 64 位 Cortex-A53 |
| Raspberry Pi Zero WH（2018）               | Broadcom [BCM2835](https://book.bsdcn.org/rpicn/shu-mei-pai/chu-li-qi.md#bcm2835) | 512 MB 内存 | 40 针 GPIO 排针        | VideoCore IV | 1 GHz 单核 32 位 ARM11      |
| Raspberry Pi Zero W（2017）                | Broadcom [BCM2835](https://book.bsdcn.org/rpicn/shu-mei-pai/chu-li-qi.md#bcm2835) | 512 MB 内存 | 未焊接引脚的 40 针 GPIO 排针 | VideoCore IV | 1 GHz 单核 32 位 ARM11      |
| Raspberry Pi Zero（2015/2016）             | Broadcom [BCM2835](https://book.bsdcn.org/rpicn/shu-mei-pai/chu-li-qi.md#bcm2835) | 512 MB 内存 | 未焊接引脚的 40 针 GPIO 排针 | VideoCore IV | 1 GHz 单核 32 位 ARM11      |

## Raspberry Pi Zero 2 W（带与不带排针）

![不带排针的 Raspberry Pi Zero 2 W（左）和带排针的版本（右）](https://1423291173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCOxpD6RTIfF28SyASLTE%2Fuploads%2Fgit-blob-535ce8ed03f26eb30ef116f29562014ab80fc6bd%2Fzero2wandwh.jpg?alt=media)

[Raspberry Pi Zero 2 W](https://www.raspberrypi.com/products/raspberry-pi-zero-2-w/) 配有未焊接引脚的 GPIO 排针；Raspberry Pi Zero 2 W with headers 配有预焊的 GPIO 排针。与 [Zero W 和 WH](#raspberry-pi-zero-w-和-wh) 一样，两个型号都可以通过 Wi-Fi 连接到网络。

Raspberry Pi Zero 2 W（带与不带排针）的尺寸约为 65 mm × 30 mm。更详细的尺寸，请参阅 [Raspberry Pi Zero 2 W 的机械图](https://pip.raspberrypi.com/documents/RP-008358-DS)。有关电路、元件和引脚连接的工程图，请参阅 [Raspberry Pi Zero 2 W 的原理图](https://pip.raspberrypi.com/documents/RP-008360-DS)。

### 相比 Raspberry Pi Zero W 和 WH 的功能变化

Raspberry Pi Zero 2 W（带与不带排针）具有与 Raspberry Pi Zero W 和 WH 相同的外形尺寸、连接器和安装孔，但还引入了以下性能和连接性改进：

* **系统级封装（SiP）。** SoC 和内存集成在单个 SiP（*RP3A0*）中，它包括：
  * 一个 Broadcom BCM2710A1 SoC，带有四个 64 位 Arm Cortex-A53 CPU 核心；每个 CPU 核心运行频率为 1 GHz。
  * 一个 400 MHz 的 Broadcom VideoCore IV GPU，用于视频和 3D 渲染任务。
  * 512 MB 的 LPDDR2 内存，运行频率为 450 MHz。
* **更快的处理器。** 以四核 64 位 Cortex-A53 处理器取代 Raspberry Pi Zero 上的单核 ARM11 处理器。
* **升级的蓝牙。** 将无线连接从蓝牙 4.0 升级到蓝牙 4.2。

以下各节在介绍这些变化的同时，还介绍：

* 焊接在 Raspberry Pi Zero 2 W 上的其他内部组件。
* 允许你将外部硬件连接到这些组件的物理插座和排针。

### Raspberry Pi Zero 2 W（带与不带排针）组件

Raspberry Pi Zero 2 W（带与不带排针）包含以下板载组件：

| 组件       | 说明                                                                                                                                                                          |
| -------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **SiP**  | SoC 和内存包含在同一组件（SiP）中。SiP 为 *RP3A0*，包含 Broadcom BCM2710A1 SoC（内含 1 GHz 四核 64 位 Cortex-A53 CPU 和 400 MHz VideoCore IV GPU），以及运行频率为 450 MHz 的 512 MB LPDDR2（增强型低功耗双倍数据速率 2）内存。 |
| **无线模块** | 一个充当两个组件的无线电模块：用于连接计算机网络的 *Wi-Fi* 无线电，提供单频（2.4 GHz）802.11b/g/n Wi-Fi；以及用于连接外设的*蓝牙*无线电，提供蓝牙 4.2 和低功耗蓝牙（BLE）。                                                                 |

### Raspberry Pi Zero 2 W（带与不带排针）端口

Raspberry Pi Zero 2 W（带与不带排针）包含以下端口：

| 端口类型                 | Raspberry Pi Zero 2 W                                                                                                | Raspberry Pi Zero 2 W with headers                                                                                     |
| -------------------- | -------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------- |
| **Micro USB 端口**     | 两个 micro USB 端口，一个用于输入电源，一个用于 USB On-The-Go（OTG），兼容 OTG 适配器以连接键盘、鼠标、USB 集线器和其他外部设备。                                  | 同左                                                                                                                     |
| **Mini-HDMI 端口**     | 一个 mini-HDMI 端口，支持单显示器，视频和音频输出最高 1080p、60 Hz。                                                                        | 同左                                                                                                                     |
| **CSI（摄像头）端口**       | 一个 2 通道 MIPI 摄像头串行接口（CSI）端口，可连接摄像头。采用 mini 22 针、0.5 mm（细）间距、11.5 mm 宽的 CSI 端口。                                       | 同左                                                                                                                     |
| **GPIO 排针（未焊接或已焊接）** | 标准 40 针 GPIO 接口，排列为两行各 20 针。GPIO 排针未焊接引脚；焊接 2 × 20、2.54 mm 排针后，其引脚可让你的 Raspberry Pi Zero 2 W 与其他硬件（如 LED、按钮、传感器等）通信。 | 标准 40 针 GPIO 接口，排列为两行各 20 针，带有预焊的 2 × 20、2.54 mm 排针。其引脚可让你的 Raspberry Pi Zero 2 W with headers 与其他硬件（如 LED、按钮、传感器等）通信。 |
| **存储卡插槽**            | 一个存储卡插槽，用于加载操作系统和存储数据。                                                                                               | 同左                                                                                                                     |

### 测试点位置

![Zero 2 W 测试点示意图](https://1423291173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCOxpD6RTIfF28SyASLTE%2Fuploads%2Fgit-blob-83e5e701dabe4a27174e27caf06e35cf72375c1f%2Fzero2-pad-diagram.png?alt=media)

Raspberry Pi Zero 2 W（带与不带排针）有若干在生产过程中使用的测试点，如下表所列。

| 标签           | 功能                | X（距原点 mm） | Y（距原点 mm） |
| ------------ | ----------------- | --------- | --------- |
| `STATUS_LED` | LED 电源状态（LOW = 亮） | 5.15      | 8.8       |
| `CORE`       | 处理器电源             | 6.3       | 18.98     |
| `RUN`        | 连接到 `GND` 以复位     | 8.37      | 22.69     |
| `5V`         | 5 V 输入            | 8.75      | 11.05     |
| `5V`         | 5 V 输入            | 11.21     | 6.3       |
| `GND`        | 接地引脚              | 10.9      | 3.69      |
| `GND`        | 接地引脚              | 17.29     | 2.41      |
| `USB_DP`     | USB 端口            | 22.55     | 1.92      |
| `USB_DM`     | USB 端口            | 24.68     | 1.92      |
| `OTG`        | On-the-go ID 引脚   | 39.9      | 7.42      |
| `1V8`        | 1.8 V 模拟电源        | 42.03     | 8.42      |
| `TV`         | 复合视频输出            | 45.58     | 3.17      |
| `GND`        | 接地引脚              | 49.38     | 3.05      |
| `GND`        | 接地引脚              | 55.99     | 22.87     |
| `3V3`        | 3.3 V I/O 电源      | 48.55     | 22.44     |
| `SD_CLK`     | SD 卡时钟引脚          | 60.95     | 18.45     |
| `SD_CMD`     | SD 卡命令引脚          | 58.2      | 16.42     |
| `SD_DAT0`    | SD 数据引脚           | 58.13     | 20.42     |
| `SD_DAT1`    | SD 数据引脚           | 60.65     | 21.1      |
| `SD_DAT2`    | SD 数据引脚           | 57.78     | 13.57     |
| `SD_DAT3`    | SD 数据引脚           | 60.8      | 15.22     |
| `BT_ON`      | 蓝牙电源状态            | 25.13     | 19.55     |
| `WL_ON`      | 无线局域网电源状态         | 27.7      | 19.2      |

## Raspberry Pi Zero W 和 WH

![Raspberry Pi Zero W（左）和 WH（右）](https://1423291173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCOxpD6RTIfF28SyASLTE%2Fuploads%2Fgit-blob-e25ecb11c1dfbd4931853e618870eeb5c0835e92%2Fzerowandwh.jpg?alt=media)

[Raspberry Pi Zero W](https://www.raspberrypi.com/products/raspberry-pi-zero-w/) 配有未焊接引脚的 GPIO 排针；Raspberry Pi Zero WH 配有预焊的 GPIO 排针。两个型号都不包含有线以太网端口，但你仍然可以通过 Wi-Fi 连接到网络。

Raspberry Pi Zero W 和 WH 的尺寸约为 65 mm × 30 mm。更详细的尺寸，请参阅 [Raspberry Pi Zero W 的机械图](https://pip.raspberrypi.com/documents/RP-008367-DS)。有关电路、元件和引脚连接的工程图，请参阅 [Raspberry Pi Zero W 的原理图](https://pip.raspberrypi.com/documents/RP-008368-DS)。

### 相比 Raspberry Pi Zero 的功能变化

Raspberry Pi Zero W 和 WH 具有与 Raspberry Pi Zero 相同的外形尺寸、组件、连接器和安装孔，但还加入了 **无线网络**：

* 单频（2.4 GHz）802.11b/g/n Wi-Fi。
* 蓝牙 4.0 和低功耗蓝牙（BLE）。

此外，Raspberry Pi Zero WH 是首个提供 **预焊 GPIO 排针** 的 Zero 型号。

以下各节在介绍这些变化的同时，还介绍：

* 焊接在 Raspberry Pi Zero W 上的其他内部组件。
* 允许你将外部硬件连接到这些组件的物理插座和排针。

### Raspberry Pi Zero W 和 WH 组件

Raspberry Pi Zero W 和 WH 包含以下板载组件：

| 组件       | 说明                                                                                                          |
| -------- | ----------------------------------------------------------------------------------------------------------- |
| **SiP**  | *Broadcom BCM2835*，包含 1 GHz 单核 32 位 ARM11 CPU 和 400 MHz VideoCore IV GPU。                                   |
| **内存**   | 512 MB *LPDDR2*（低功耗双倍数据速率 2）内存，运行频率为 450 MHz。                                                               |
| **无线模块** | 一个充当两个组件的无线电模块：用于连接计算机网络的 *Wi-Fi* 无线电，提供单频（2.4 GHz）802.11b/g/n Wi-Fi；以及用于连接外设的*蓝牙*无线电，提供蓝牙 4.0 和低功耗蓝牙（BLE）。 |

### Raspberry Pi Zero W 端口

Raspberry Pi Zero W 和 WH 包含以下端口：

| 端口类型                 | Raspberry Pi Zero W                                                                                                | Raspberry Pi Zero WH                                                                                     |
| -------------------- | ------------------------------------------------------------------------------------------------------------------ | -------------------------------------------------------------------------------------------------------- |
| **Micro USB 端口**     | 两个 micro USB 端口，一个用于输入电源，一个用于 USB on-the-go（OTG），兼容 OTG 适配器以连接键盘、鼠标、USB 集线器和其他外部设备。                                | 同左                                                                                                       |
| **Mini-HDMI 端口**     | 一个 mini-HDMI 端口，支持单显示器，视频和音频输出最高 1080p、60 Hz。                                                                      | 同左                                                                                                       |
| **CSI（摄像头）端口**       | 一个 2 通道 MIPI 摄像头串行接口（CSI）端口，可连接摄像头。采用 mini 22 针、0.5 mm（细）间距、11.5 mm 宽的 CSI 端口。                                     | 同左                                                                                                       |
| **GPIO 排针（未焊接或已焊接）** | 标准 40 针 GPIO 接口，排列为两行各 20 针。GPIO 排针未焊接引脚；焊接 2 × 20、2.54 mm 排针后，其引脚可让你的 Raspberry Pi Zero W 与其他硬件（如 LED、按钮、传感器等）通信。 | 标准 40 针 GPIO 接口，排列为两行各 20 针，带有预焊的 2 × 20、2.54 mm 排针。其引脚可让你的 Raspberry Pi Zero WH 与其他硬件（如 LED、按钮、传感器等）通信。 |
| **存储卡插槽**            | 一个存储卡插槽，用于加载操作系统和存储数据。                                                                                             | 同左                                                                                                       |

## Raspberry Pi Zero

Raspberry Pi Zero 是经典型树莓派型号的更紧凑版本，连接器更少，GPIO 排针未焊接引脚。

![Raspberry Pi Zero](https://1423291173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCOxpD6RTIfF28SyASLTE%2Fuploads%2Fgit-blob-418701561942994202b31aa0275e9a5cc96bf390%2Fzero1.jpg?alt=media)

Raspberry Pi Zero 的尺寸约为 65 mm × 30 mm。更详细的尺寸，请参阅 [Raspberry Pi Zero 的机械图](https://pip.raspberrypi.com/documents/RP-008366-DS)。有关电路、元件和引脚连接的工程图，请参阅 [Raspberry Pi Zero 的原理图](https://pip.raspberrypi.com/documents/RP-008365-DS)。

还有适用于 Raspberry Pi Zero 机箱的机械图：

* [Raspberry Pi Zero 机箱机械图（PDF）](https://pip.raspberrypi.com/documents/RP-008362-DS)
* [带 GPIO 盖板的 Raspberry Pi Zero 机箱机械图（PDF）](https://pip.raspberrypi.com/documents/RP-008364-DS)
* [带摄像头盖板的 Raspberry Pi Zero 机箱机械图（PDF）](https://pip.raspberrypi.com/documents/RP-008363-DS)

### Raspberry Pi Zero 组件

Raspberry Pi Zero 包含以下板载组件：

| 组件      | 说明                                                                        |
| ------- | ------------------------------------------------------------------------- |
| **SoC** | *Broadcom BCM2835*，包含 1 GHz 单核 32 位 ARM11 CPU 和 400 MHz VideoCore IV GPU。 |
| **内存**  | 512 MB *LPDDR2*（低功耗双倍数据速率 2）内存，运行频率为 450 MHz。                             |

### Raspberry Pi Zero 端口

Raspberry Pi Zero 包含以下端口：

| 端口类型             | 说明                                                                                                               |
| ---------------- | ---------------------------------------------------------------------------------------------------------------- |
| **Micro USB 端口** | 两个 micro USB 端口，一个用于输入电源，一个用于 USB on-the-go（OTG），兼容 OTG 适配器以连接键盘、鼠标、USB 集线器和其他外部设备。                              |
| **Mini-HDMI 端口** | 一个 mini-HDMI 端口，支持单显示器，视频和音频输出最高 1080p、60 Hz。                                                                    |
| **CSI（摄像头）端口**   | 一个 2 通道 MIPI 摄像头串行接口（CSI）端口，可连接摄像头。采用 mini 22 针、0.5 mm（细）间距、11.5 mm 宽的 CSI 端口。                                   |
| **GPIO 排针（未焊接）** | 标准 40 针 GPIO 接口，排列为两行各 20 针。GPIO 排针未焊接引脚；焊接 2 × 20、2.54 mm 排针后，其引脚可让你的 Raspberry Pi Zero 与其他硬件（如 LED、按钮、传感器等）通信。 |
| **存储卡插槽**        | 一个存储卡插槽，用于加载操作系统和存储数据。                                                                                           |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://book.bsdcn.org/rpicn/shu-mei-pai/ling-dian-xing-hao.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
