> For the complete documentation index, see [llms.txt](https://book.bsdcn.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://book.bsdcn.org/rpicn/pei-jian/raspberry-pi-monitor.md).

# 显示器

## 树莓派显示器

[树莓派显示器](https://www.raspberrypi.com/products/raspberry-pi-monitor/)是一款 15.6 英寸 1920 × 1080p IPS LCD 显示屏，可通过 HDMI 电缆连接到计算机。显示器还需要一个 USB-C 电源。要获得完整的亮度和音量范围，该电源必须是能够提供至少 1.5A 电流的 USB-PD 电源。

![树莓派显示器](https://1423291173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCOxpD6RTIfF28SyASLTE%2Fuploads%2Fgit-blob-b8c91e40ff1a004573762b1decfdd0692f7f8e53%2Fmonitor-hero.png?alt=media)

树莓派显示器

该显示器兼容所有支持 HDMI 输出的树莓派型号。

### 控制

显示器背面包括以下控制项：

* 用于进入和退出待机模式的按钮（以 ⏻ 电源符号标示）
* 用于增加和降低显示屏亮度的按钮（以 🔆 太阳符号标示）
* 用于增加和降低扬声器音量的按钮（以 🔈 扬声器符号标示）

### 屏幕显示消息

屏幕显示（OSD）可以显示以下消息：

|                                                                                                                消息                                                                                                               | 描述                                            |
| :-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------: | --------------------------------------------- |
|        ![未检测到 HDMI 信号](https://1423291173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCOxpD6RTIfF28SyASLTE%2Fuploads%2Fgit-blob-408ad418bad021acb3ad5c8bb1b525bb506781b3%2Fno-hdmi.png?alt=media)       | 未检测到 HDMI 信号。                                 |
| ![待机模式](https://1423291173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCOxpD6RTIfF28SyASLTE%2Fuploads%2Fgit-blob-2c031211895abafd4da506380fda22c01ffbb729%2Fno-valid-hdmi-signal-standby.png?alt=media) | 显示器即将进入待机模式以节省功耗。                             |
|  ![不支持的分辨率](https://1423291173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCOxpD6RTIfF28SyASLTE%2Fuploads%2Fgit-blob-53342173890d6d1eb1c5ca8549b0c4fe4efeab67%2Fnot-supported-resolution.png?alt=media) | 不支持所连接设备的输出显示分辨率。                             |
|       ![省电模式](https://1423291173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCOxpD6RTIfF28SyASLTE%2Fuploads%2Fgit-blob-106694ee183c576cd52e86fe9e0621bfd7d89433%2Fpower-saving-mode.png?alt=media)      | 显示器正以省电模式运行，亮度和音量降低，因为它未连接到能够提供至少 1.5A 电流的电源。 |

此外，OSD 会用 🔆（太阳）符号提示显示屏亮度的变化，用 🔈（扬声器）符号提示扬声器音量的变化。亮度和音量均采用 0 到 100 的范围。

> **技巧**
>
> 如果你在显示器无法检测到 HDMI 信号时尝试退出待机模式，待机按钮下方的红色 LED 会短暂亮起，但显示器会保持待机模式。

### 放置显示器

使用以下方法放置显示器：

* 使用一体式支架调整显示器的角度。
* 使用红色后部塑料外壳背面的四个 VESA 安装孔，将显示器安装到支臂或支架上。

  > **重要**
  >
  > 使用间隔柱，确保显示屏电缆和电源电缆有足够的出线空间。
* 将一体式支架完全向上翻起，朝向显示器顶部。使用钻孔模板创建两个相距 55 mm 的安装点。利用一体式支架背面的槽口悬挂显示器。

  ![钻孔模板](https://1423291173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCOxpD6RTIfF28SyASLTE%2Fuploads%2Fgit-blob-a1553774a8f4cbaec809d8b806d0aad2f1de186f%2Fdrill-hole-template.png?alt=media)

  钻孔模板

### 为显示器供电

树莓派显示器通过 5V [USB Power Delivery](https://en.wikipedia.org/wiki/USB_hardware#USB_Power_Delivery)（USB-PD）电源供电。许多 USB-C 电源，包括树莓派 4 和树莓派 5 的官方电源，都支持此标准。

当使用通过 USB-PD 提供至少 1.5A 电流的电源时，显示器以 **全功率模式** 运行。在全功率模式下，你可以使用显示屏亮度和扬声器音量的完整范围（0%-100%）。

当使用的电源*不*通过 USB-PD 提供至少 1.5A 电流（包括所有 USB-A 电源）时，显示器以 **省电模式** 运行。省电模式会限制最大显示屏亮度和最大扬声器音量，以确保可靠运行。在省电模式下，你可以使用显示屏亮度的有限范围（0-50%）和扬声器音量的有限范围（0-60%）。当由树莓派供电时，显示器以省电模式运行，因为树莓派设备无法通过 USB-A 连接提供 1.5A 电流。

要从省电模式切换到全功率模式，请按住 **提高亮度** 按钮 3 秒。

> **技巧**
>
> 如果显示器反复闪烁，说明你的 USB 电源无法提供足够的电流为显示器供电。如果你通过树莓派 5、500 或 500+ 为显示器供电，而这些设备本身由 5V/3A 电源供电，就可能出现这种情况。请尝试以下修复方法，让显示器不再反复闪烁：
>
> * 降低显示屏亮度和音量（你可能需要将显示器连接到另一个电源，才能访问这些设置）
> * 改用其他电源或电缆

### 规格

* 对角线：15.6 英寸
* 分辨率：1920 × 1080
* 类型：IPS LCD
* 色域：45%
* 对比度：800:1
* 亮度：250 cd/m²
* 屏幕涂层：防眩光，3H 硬度
* 显示区域：344 × 193 mm
* 尺寸：237 × 360 × 20 mm
* 重量：850 g
* 支持的分辨率：
  * 1920 × 1080p @ 50/60Hz
  * 1280 × 720p @ 50/60Hz
  * 720 × 576p @ 50/60Hz
  * 720 × 480p @ 50/60Hz
  * 640 × 480p @ 50/60Hz
* 输入：HDMI 1.4；支持 DDC-CI
* 电源输入：USB-C；需在 5V 下通过 USB-PD 提供 1.5A 电流，方可获得完整的亮度和音量范围
* 功耗：使用中 4.5-6.5 W；空闲时 < 0.1 W
* 扬声器：2 × 1.2 W（立体声）
* 端口：3.5 mm 音频插孔

### 机械图纸

![机械图纸](https://1423291173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCOxpD6RTIfF28SyASLTE%2Fuploads%2Fgit-blob-2df26d1ba6bf41ea2cded46f860ce15d35c0da9b%2Fmechanical-drawing.png?alt=media)

机械图纸


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://book.bsdcn.org/rpicn/pei-jian/raspberry-pi-monitor.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
