> For the complete documentation index, see [llms.txt](https://book.bsdcn.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://book.bsdcn.org/man/man4/malo.4.md).

# malo.4

`malo` — Marvell Libertas IEEE 802.11b/g 无线网络驱动

## 名称

`malo`

## 概要

要将此驱动编译进内核，请在内核配置文件中加入以下行：

> device malo device pci device wlan device firmware

或者，要在引导时以模块形式加载该驱动，请在 loader.conf(5) 中加入以下行：

```sh
if_malo_load="YES"
```

## 描述

`malo` 驱动提供对基于 Marvell Libertas 88W8335 的 PCI 和 Cardbus 网络适配器的支持。`malo` 支持 `station` 和 `monitor` 模式操作。任何时候只能配置一个虚拟接口。有关配置此设备的更多信息，请参见 [ifconfig(8)](/man/man8/ifconfig.8.md)。

此驱动在运行前需要先加载固件。在 [ifconfig(8)](/man/man8/ifconfig.8.md) 工作之前，需要安装 `ports/net/malo-firmware-kmod` port。

## 硬件

以下网卡属于 `malo` 驱动支持的网卡：

| 网卡              | 芯片      | 总线  | 标准  |
| --------------- | ------- | --- | --- |
| Netgear WG311v3 | 88W8335 | PCI | b/g |
| Tenda TWL542P   | 88W8335 | PCI | b/g |
| U-Khan UW-2054i | 88W8335 | PCI | b/g |

## 实例

加入现有的 BSS 网络（即连接到接入点）：

```sh
ifconfig wlan create wlandev malo0 inet 192.168.0.20 e
    netmask 0xffffff00
```

加入网络名为“`my_net`”的特定 BSS 网络：

```sh
ifconfig wlan create wlandev malo0 ssid my_net up
```

加入使用 64 位 WEP 加密的特定 BSS 网络：

```sh
ifconfig wlan create wlandev malo0 ssid my_net e
	wepmode on wepkey 0x1234567890 weptxkey 1 up
```

## 参见

[cardbus(4)](/man/man4/cardbus.4.md), [pci(4)](/man/man4/pci.4.md), [wlan(4)](/man/man4/wlan.4.md), [wlan\_ccmp(4)](/man/man4/wlan_ccmp.4.md), [wlan\_tkip(4)](/man/man4/wlan_tkip.4.md), [wlan\_wep(4)](/man/man4/wlan_wep.4.md), [ifconfig(8)](/man/man8/ifconfig.8.md), wpa\_supplicant(8)

## 历史

`malo` 设备驱动首次出现于 FreeBSD 7.1。


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://book.bsdcn.org/man/man4/malo.4.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.